- 1″ screws
- 2 trellis’
- Vine plant (of your choice, ivy, vine, whatever you want – but do your homework)
- Potting Soil
Since you are drilling into siding it can be a little tougher, so make sure you research whatever you’re drilling into and use a stud finder or change your screws if you are working with different materials. Researching and doing your homework on this part is crucial.
- Plan out where you want to hang them, then pencil the top so you can line it up. We have the hose right there and then they’re between two windows so we had to measure all that to ensure they were centered and leveled.
- Once you have that all marked, have one person hold it up while the other screws it in. We did screws in a “T” so one at the top, bottom, then both sides and it holds really well.
- Next is the planting part, I recommend asking your local Lowe’s what vine they recommend for your area of the house (is it sunny, shady, etc.) That way you can get the best plant for that area and it’ll hopefully thrive! You’ll mix potting soil into the dirt where you’re planting to help it out a little!
- After you get the plants planted in right under the trellis’ then if you have any vines long enough to reach, wrap them around the trellis to start that effect! You’ll probably have to do this for several months while it grows to guide it in the path you want!
Then you have the finished project like this:
This post was in partnership with Lowe’s.